Used Hand Tools » controltech

Used Hand Tools » controltech https://usedhandtools.net Sun, 21 Jun 2026 05:36:49 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 Snap On 3/8 Torque Wrench & Angle CTECH2R240A Top Model ControlTech. Incl VAT https://usedhandtools.net/2019/03/snap-on-38-torque-wrench-angle-ctech2r240a-top-model-controltech-incl-vat/ https://usedhandtools.net/2019/03/snap-on-38-torque-wrench-angle-ctech2r240a-top-model-controltech-incl-vat/#comments Mon, 04 Mar 2019 21:36:20 +0000 http://usedhandtools.net/2019/03/snap-on-38-torque-wrench-angle-ctech2r240a-top-model-controltech-incl-vat/

Snap On 3/8 Torque Wrench & Angle CTECH2R240A Top Model ControlTech. Incl VAT

Snap On 3/8 Torque Wrench & Angle CTECH2R240A Top Model ControlTech. Top of the range Snap On Control Tech Industrial Torque Wrench. Full VAT Receipt Supplied. This is the low torque 3/8″ version, essentially a 3/8″ ratchet head on a 1/4 torque body so please check the ranges are what you are looking for. CTECH2R240, 3/8 Drive, 1-20 ft-lb and can be switched to in-lb(12-240), Nm(1.4-27.2), KG-CM and DNm. Can be switched between’torque and angle’ mode or’torque then angle’. Fully programmable, job mode etc. Built in memory downloadable by USB. Dual 80 Ratchet Head. LCD, LED, Vibration and Audible Beep. This is a used tool but came from a large aerospace company where it had minimal use in a clean environment. &###xA0;Unlike the ATECH range, these have an all steel body so are very sturdy. &###xA0;Very good condition though obviously will have signs of usage and storage. For&###xA0;UPS, we use a Next Day service though for remote areas, this can be 2 days. &###x200B;&###x200B;&###x200B;&###x200B;&###x200B;&###x200B;&###x200B;View our profile page. FIND MORE TOOLS IN OUR STORE. Top of the range Snap On Control Tech Industrial Torque Wrench Full VAT Receipt Supplied This is the low torque 3/8″ version, essentially a 3/8″ ratchet head on a 1/4″ torque body so please check the ranges are what you are looking for CTECH2R240, 3/8″ Drive, 1-20 ft-lb and can be switched to in-lb(12-240), Nm(1.4-27.2), KG-CM and DNm. Calibration date 18/10/2018 Can be switched between’torque and angle’ mode or’torque then angle’. Unlike the ATECH range, these have an all steel body so are very sturdy. Very good condition though obviously will have signs of usage and storage. The item “Snap On 3/8 Torque Wrench & Angle CTECH2R240A Top Model ControlTech. Incl VAT” is in sale since Friday, December 28, 2018. This item is in the category “Home, Furniture & DIY\DIY Tools & Workshop Equipment\Hand Tools\Spanners & Wrenches\Torque Wrenches”. The seller is “r107online” and is located in London. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Canada, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, United arab emirates, Ukraine, Chile.

MPN: CTECH2R240A
Brand: Snap-on
Action: Ratcheting
Drive Size: 3/8″
Type: Electronic Torque Wrench

]]> https://usedhandtools.net/2019/03/snap-on-38-torque-wrench-angle-ctech2r240a-top-model-controltech-incl-vat/feed/ 0 Snap-on ControlTech 1/4 Digital Torque Wrench C-TECH1R240A 12-240 Snap On https://usedhandtools.net/2018/12/snap-on-controltech-14-digital-torque-wrench-c-tech1r240a-12-240-snap-on/ https://usedhandtools.net/2018/12/snap-on-controltech-14-digital-torque-wrench-c-tech1r240a-12-240-snap-on/#comments Fri, 28 Dec 2018 11:18:36 +0000 http://usedhandtools.net/2018/12/snap-on-controltech-14-digital-torque-wrench-c-tech1r240a-12-240-snap-on/

Snap-on ControlTech 1/4 Digital Torque Wrench C-TECH1R240A 12-240 Snap On

SEE PIXS NICE USED WRENCHES NONE ARE SIGNIFIGANTLY FLAWED. ALL WORK FINE BUT ARE OUT OF CALIBRATION dates [expired]. The item “Snap-on ControlTech 1/4 Digital Torque Wrench C-TECH1R240A 12-240 Snap On” is in sale since Friday, December 14, 2018. This item is in the category “Business & Industrial\Light Equipment & Tools\Hand Tools\Wrenches”. The seller is “mr.fisc” and is located in El Dorado, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion.

Brand: Snap-on
Model: CTECH1R240A
Assortment: snap on
Type: torque wrench
MPN: CTECH1R240A

]]> https://usedhandtools.net/2018/12/snap-on-controltech-14-digital-torque-wrench-c-tech1r240a-12-240-snap-on/feed/ 0 Snap On 1/4 Torque Wrench & Angle CTECH1R240A Top Model ControlTech £185+VAT https://usedhandtools.net/2018/09/snap-on-14-torque-wrench-angle-ctech1r240a-top-model-controltech-185vat-2/ https://usedhandtools.net/2018/09/snap-on-14-torque-wrench-angle-ctech1r240a-top-model-controltech-185vat-2/#comments Wed, 19 Sep 2018 22:54:06 +0000 http://usedhandtools.net/2018/09/snap-on-14-torque-wrench-angle-ctech1r240a-top-model-controltech-185vat-2/

Snap On 1/4 Torque Wrench & Angle CTECH1R240A Top Model ControlTech £185+VAT

Snap On 1/4 Torque Wrench & Angle CTECH1R240A Top Model ControlTech &###xA3;185+VAT. Top of the range Snap On Control Tech Industrial Torque Wrench. CTECH1R240, 1/4 Drive, 1-20 ft-lb and can be switched to in-lb(12-240), Nm(1.4-27.2), KG-CM and DNm. Calibration date shows as February 2018 and we have tested it on our own torque tester which puts it well within tolerance. Can be switched between’torque and angle’ mode or’torque then angle’. Fully programmable, job mode etc. Built in memory downloadable by USB. Dual 80 Ratchet Head. LCD, LED, Vibration and Audible Beep. This is a used tool but came from a large aerospace company where it had minimal use in a clean environment. &###xA0;Unlike the ATECH range, these have an all steel body so are very sturdy. &###xA0;Very good condition though obviously will have signs of usage and storage. Currently fitted with the head locking washer but easily removed to revert to a flex-head. Full VAT Receipt Supplied. For&###xA0;UPS, we use a Next Day service though for remote areas, this can be 2 days. &###x200B;&###x200B;&###x200B;&###x200B;&###x200B;&###x200B;&###x200B;View our profile page. See our other items. Top of the range Snap On Control Tech Industrial Torque Wrench CTECH1R240, 1/4 Drive, 1-20 ft-lb and can be switched to in-lb(12-240), Nm(1.4-27.2), KG-CM and DNm. Unlike the ATECH range, these have an all steel body so are very sturdy. Very good condition though obviously will have signs of usage and storage. The item “Snap On 1/4 Torque Wrench & Angle CTECH1R240A Top Model ControlTech £185+VAT” is in sale since Friday, July 20, 2018. This item is in the category “Vehicle Parts & Accessories\Garage Equipment & Tools\Hand Tools\Precision & Measuring Tools”. The seller is “r107online” and is located in London. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Turks and caicos islands, Aruba, Chile.

Manufacturer Part Number: CTECH1R240A
Brand: Snap-on
Type: Torque Wrench

]]> https://usedhandtools.net/2018/09/snap-on-14-torque-wrench-angle-ctech1r240a-top-model-controltech-185vat-2/feed/ 0 Snap On 3/8 Torque Wrench & Angle CTECH2R240A Top Model ControlTech https://usedhandtools.net/2018/08/snap-on-38-torque-wrench-angle-ctech2r240a-top-model-controltech/ https://usedhandtools.net/2018/08/snap-on-38-torque-wrench-angle-ctech2r240a-top-model-controltech/#comments Wed, 15 Aug 2018 01:47:17 +0000 http://usedhandtools.net/2018/08/snap-on-38-torque-wrench-angle-ctech2r240a-top-model-controltech/

Snap On 3/8 Torque Wrench & Angle CTECH2R240A Top Model ControlTech

Snap On 3/8 Torque Wrench & Angle CTECH2R240A Top Model ControlTech. Top of the range Snap On Control Tech Industrial Torque Wrench. This is the low torque 3/8″ version, essentially a 3/8″ ratchet head on a 1/4 torque body so please check the ranges are what you are looking for. CTECH2R240, 3/8 Drive, 1-20 ft-lb and can be switched to in-lb(12-240), Nm(1.4-27.2), KG-CM and DNm. Calibration date shows as February 2018 and we have tested it on our own torque tester which puts it well within tolerance. Can be switched between’torque and angle’ mode or’torque then angle’. Fully programmable, job mode etc. Built in memory downloadable by USB. Dual 80 Ratchet Head. LCD, LED, Vibration and Audible Beep. This is a used tool but came from a large aerospace company where it had minimal use in a clean environment. &###xA0;Unlike the ATECH range, these have an all steel body so are very sturdy. &###xA0;Very good condition though obviously will have signs of usage and storage. Currently fitted with the head locking washer but easily removed to revert to a flex-head. We have a number of these but are listing them individually so the tool in the photos is the exact one you will receive. For&###xA0;UPS, we use a Next Day service though for remote areas, this can be 2 days. &###x200B;&###x200B;&###x200B;&###x200B;&###x200B;&###x200B;&###x200B;View our profile page. See our other items. Top of the range Snap On Control Tech Industrial Torque Wrench This is the low torque 3/8″ version, essentially a 3/8″ ratchet head on a 1/4″ torque body so please check the ranges are what you are looking for CTECH2R240, 3/8″ Drive, 1-20 ft-lb and can be switched to in-lb(12-240), Nm(1.4-27.2), KG-CM and DNm. Unlike the ATECH range, these have an all steel body so are very sturdy. Very good condition though obviously will have signs of usage and storage. The item “Snap On 3/8 Torque Wrench & Angle CTECH2R240A Top Model ControlTech” is in sale since Friday, June 15, 2018. This item is in the category “Home, Furniture & DIY\DIY Tools & Workshop Equipment\Hand Tools\Spanners & Wrenches\Torque Wrenches”. The seller is “r107online” and is located in London. This item can be shipped to United Kingdom, United States, Japan, Canada, Australia.

MPN: CTECH2R240A
Brand: Snap-on
Action: Ratcheting
Drive Size: 3/8″
Type: Electronic Torque Wrench

Incoming search terms:

https://usedhandtools net/2018/08/snap-on-38-torque-wrench-angle-ctech2r240a-top-model-controltech/

]]> https://usedhandtools.net/2018/08/snap-on-38-torque-wrench-angle-ctech2r240a-top-model-controltech/feed/ 0 Snap On 1/4 Torque Wrench & Angle CTECH1R240A. Top Model ControlTech https://usedhandtools.net/2018/06/snap-on-14-torque-wrench-angle-ctech1r240a-top-model-controltech/ https://usedhandtools.net/2018/06/snap-on-14-torque-wrench-angle-ctech1r240a-top-model-controltech/#comments Wed, 27 Jun 2018 10:35:04 +0000 http://usedhandtools.net/2018/06/snap-on-14-torque-wrench-angle-ctech1r240a-top-model-controltech/

Snap On 1/4 Torque Wrench & Angle CTECH1R240A. Top Model ControlTech

Snap On 1/4 Torque Wrench & Angle CTECH1R240A. Top of the range Snap On Control Tech Industrial Torque Wrench. CTECH1R240, 1/4 Drive, 1-20 ft-lb and can be switched to in-lb(12-240), Nm(1.4-27.2), KG-CM and DNm. Calibration date shows as November 2017 and we have tested it on our own torque tester which puts it well within tolerance. Can be switched between’torque and angle’ mode or’torque then angle’. Fully programmable, job mode etc. Built in memory downloadable by USB. Dual 80 Ratchet Head. LCD, LED, Vibration and Audible Beep. This is a used tool but came from a large aerospace company where it had minimal use in a clean environment. &###xA0;Unlike the ATECH range, these have an all steel body so are very sturdy. &###xA0;Very good condition though obviously will have signs of usage and storage. Currently fitted with the head locking washer but easily removed to revert to a flex-head. Full VAT Receipt Supplied. For&###xA0;UPS, we use a Next Day service though for remote areas, this can be 2 days. &###x200B;&###x200B;&###x200B;&###x200B;&###x200B;&###x200B;&###x200B;View our profile page. See our other items. Top of the range Snap On Control Tech Industrial Torque Wrench CTECH1R240, 1/4 Drive, 1-20 ft-lb and can be switched to in-lb(12-240), Nm(1.4-27.2), KG-CM and DNm. Unlike the ATECH range, these have an all steel body so are very sturdy. Very good condition though obviously will have signs of usage and storage. The item “Snap On 1/4 Torque Wrench & Angle CTECH1R240A. Top Model ControlTech” is in sale since Thursday, May 17, 2018. This item is in the category “Home, Furniture & DIY\DIY Tools\Hand Tools\Spanners & Wrenches\Torque Wrenches”. The seller is “r107online” and is located in London. This item can be shipped to United Kingdom, United States, Japan, Canada, Australia.

MPN: CTECH1R240A
Brand: Snap-on
Drive Size: 1/4″

]]> https://usedhandtools.net/2018/06/snap-on-14-torque-wrench-angle-ctech1r240a-top-model-controltech/feed/ 0 Snap On 1/4 Torque Wrench & Angle CTECH1R240A Top Model ControlTech £185+VAT https://usedhandtools.net/2018/05/snap-on-14-torque-wrench-angle-ctech1r240a-top-model-controltech-185vat/ https://usedhandtools.net/2018/05/snap-on-14-torque-wrench-angle-ctech1r240a-top-model-controltech-185vat/#comments Wed, 30 May 2018 08:42:18 +0000 http://usedhandtools.net/2018/05/snap-on-14-torque-wrench-angle-ctech1r240a-top-model-controltech-185vat/

Snap On 1/4 Torque Wrench & Angle CTECH1R240A Top Model ControlTech &###xA3;185+VAT. Top of the range Snap On Control Tech Industrial Torque Wrench which has an RRP of over &###xA3;1000 + VAT! CTECH1R240, 1/4 Drive, 1-20 ft-lb and can be switched to in-lb(12-240), Nm(1.4-27.2), KG-CM and DNm. Calibration date shows as November 2017 and we have tested it on our own torque machine which puts it well within tolerance. Can be switched between’torque and angle’ mode or’torque then angle’. Fully programmable, job mode etc. Built in memory downloadable by USB. Dual 80 Ratchet Head. LCD, LED, Vibration and Audible Beep. This is a used tool but came from a large aerospace company where it had minimal use in a clean environment. &###xA0;Unlike the ATECH range, these have an all steel body so are very sturdy. &###xA0;Very good condition though obviously will have signs of usage and storage. Currently fitted with the head locking washer but easily removed to revert to a flex-head. Full VAT Receipt Supplied. For&###xA0;UPS, we use a Next Day service though for remote areas, this can be 2 days. &###x200B;&###x200B;&###x200B;&###x200B;&###x200B;&###x200B;&###x200B;View our profile page. See our other items. Top of the range Snap On Control Tech Industrial Torque Wrench which has an RRP of over £1000 + VAT! Unlike the ATECH range, these have an all steel body so are very sturdy. Very good condition though obviously will have signs of usage and storage. The item “Snap On 1/4 Torque Wrench & Angle CTECH1R240A Top Model ControlTech £185+VAT” is in sale since Thursday, May 17, 2018. This item is in the category “Vehicle Parts & Accessories\Garage Equipment & Tools\Hand Tools\Precision & Measuring Tools”. The seller is “r107online” and is located in London. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, Russian federation, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Turks and caicos islands, Aruba, Chile.

Manufacturer Part Number: CTECH1R240A
Brand: Snap-on
Type: Torque Wrench

]]> https://usedhandtools.net/2018/05/snap-on-14-torque-wrench-angle-ctech1r240a-top-model-controltech-185vat/feed/ 0