https://usedhandtools.net Sat, 04 Jul 2026 18:10:43 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://usedhandtools.net/2026/07/snap-on-cg270-13-pc-heavy-duty-general-purpose-puller-set-owned-from-new-nc30/ https://usedhandtools.net/2026/07/snap-on-cg270-13-pc-heavy-duty-general-purpose-puller-set-owned-from-new-nc30/#comments Wed, 01 Jul 2026 06:03:44 +0000 https://usedhandtools.net/2026/07/snap-on-cg270-13-pc-heavy-duty-general-purpose-puller-set-owned-from-new-nc30/











Welcome to my retirement sale – GF Racing UK Northern Workshop. Snap On CG270 13 pc Heavy Duty General Purpose Puller Set. Bought new by me in the 80s from my Snap On rep – 100% complete. Used on MGA MGB hubs when I was rebuilding these cars. Then stored for 20 plus years in one of my Snap On roll cabs when I went to work in Asia. Subsequently used on Honda VFR400 NC30 rear hubs… Perfect tool for the job. The plating is tarnished – some of the puller arm tips have some marks but all fine for many more years use. Sadly it’s original box / spare point and paperwork are long gone – unusual for me! Comprises: 3-jaw yoke with 2 slot positions, 2-jaw yoke with 2 slot positions, 3 jaw set hook, 2 jaw set deep, pressure screw, lock plate, spring, adjusting nut / spring – please see pictures. Easy to use: Spring loaded locking mechanism allows the puller jaws to easily lock onto work surface for both “inside” and “outside” pulling applications, preventing the puller from slipping off the application-two-handed operation without the use of tools. Interchangeability: Reversible jaw design, two-position yokes that accommodate multiple jaw lengths, spring loaded mechanism allows quick changeover without the disassembly of the puller and without the need of nuts and bolts resulting in faster set-ups and fewer man-hours. Strength and durability: One-piece jaw construction that does not use pins or bolts, provides a stronger, safer jaw; power pressure screws are roll threaded and heat-treated for strength and durability; forged jaws and yokes are heat-treated for maximum strength and durability.

]]> https://usedhandtools.net/2026/07/snap-on-cg270-13-pc-heavy-duty-general-purpose-puller-set-owned-from-new-nc30/feed/ 0 https://usedhandtools.net/2026/04/snap-on-pit-120-38-impact-driver-set-with-5-pozi-flat-bits-owned-from-new/ https://usedhandtools.net/2026/04/snap-on-pit-120-38-impact-driver-set-with-5-pozi-flat-bits-owned-from-new/#comments Sat, 04 Apr 2026 23:19:55 +0000 https://usedhandtools.net/2026/04/snap-on-pit-120-38-impact-driver-set-with-5-pozi-flat-bits-owned-from-new/









Welcome to my retirement sale – GF Racing UK Northern Workshop. Snap On 3/8 Impact Driver set PIT 120 in original case – owned from new with. F62E FLAT – never used. F42 FLAT – never used. Delivers cam action impact when struck with a hammer for loosening or tightening fasteners. I’m downsizing my Snap On tools before I return home to the Philippines full time for retirement. I bought this new from my UK Snap On agent in the late 70s – for race MGA work. When I went to work in China in the 80s this was stored in one of my Snap On boxes and not used since. Always cleaned / lubed after use. The case has a couple of minor cracks – please see pictures – I plastic welded one – so long ago now. End of the impact driver has a few marks as expected. Nice bargain for someone??

]]> https://usedhandtools.net/2026/04/snap-on-pit-120-38-impact-driver-set-with-5-pozi-flat-bits-owned-from-new/feed/ 0 https://usedhandtools.net/2025/08/snap-on-af-sockets-tray-38-and-14-all-owned-from-new-not-used-since-the-80s/ https://usedhandtools.net/2025/08/snap-on-af-sockets-tray-38-and-14-all-owned-from-new-not-used-since-the-80s/#comments Sat, 16 Aug 2025 18:22:45 +0000 https://usedhandtools.net/2025/08/snap-on-af-sockets-tray-38-and-14-all-owned-from-new-not-used-since-the-80s/













Welcome to my retirement sale – GF Racing UK Northern Workshop. Finally sorted the last of my Snap On AF tools – all bought new by me from my Snap On rep in the 80s for MG race car work. Stored carefully in one of my Snap On boxes in the late 80s when I went to work in Hong Kong and not used since – as follows. Snap On storage box – part number KRA-275A – bit scratched from use but all fine and always cleaned – fitted with. Snap On shallow AF 3/8 flank drive impact 6 point sockets as follows – all have had light use and are in good condition. 1/2 IMF160 – qty 2. Snap On short 6 point 1/4 flank drive sockets as follows. 7/16 TM14 – very light use. 3/8 TM12 – used the most has some very minor internal corrosion marks but that’s me being fussy. 11/32 TM11 – never used. 1/4 TM8 – very very light use. 7/32 TM7 – never used. 3/16 TM6 – never used. 1/2 TMD16 12 point – light use. 6 inch 1/4 knurled drive extension bar TMXK60 – only ever used a couple of times. All tools cleaned / sprayed with ACF50 after any use. Snap On sales data.. Flank Drive wrenching system delivers up to 20% more turning power without slipping or rounding while exceeding ANSI® performance standards. The hex depth of our impact sockets will start to thread the nut onto the stud; competitive sockets with a deeper hex require the user to start the nut by hand. Snap-on impact sockets are heat-treated to optimize impact service life with a lower hardness than hand sockets and are able to withstand repeated cycling loads of impact wrenches. Manufactured from the highest quality proprietary steel, providing optimum strength, durability, and longer life. Square drive side hole works with ball or pin type retention. Industrial finish helps protect against corrosion. Grab a bargain – car pic.

]]> https://usedhandtools.net/2025/08/snap-on-af-sockets-tray-38-and-14-all-owned-from-new-not-used-since-the-80s/feed/ 0 https://usedhandtools.net/2024/11/used-pre-owned-laminate-flooring/ https://usedhandtools.net/2024/11/used-pre-owned-laminate-flooring/#comments Tue, 05 Nov 2024 06:54:07 +0000 https://usedhandtools.net/2024/11/used-pre-owned-laminate-flooring/






Upto 40 meters square of oak laminated floor in great condition ideal for landlords home owners on a budget etc flat is in Clapham Common near tube, if you could help to remove then it will be even cheaper but needs to go asap.

]]> https://usedhandtools.net/2024/11/used-pre-owned-laminate-flooring/feed/ 0 https://usedhandtools.net/2024/07/snap-on-78-flexible-flex-head-pass-through-ratchet-wa28afl-pre-owned/ https://usedhandtools.net/2024/07/snap-on-78-flexible-flex-head-pass-through-ratchet-wa28afl-pre-owned/#comments Wed, 31 Jul 2024 05:35:22 +0000 https://usedhandtools.net/2024/07/snap-on-78-flexible-flex-head-pass-through-ratchet-wa28afl-pre-owned/









Snap On 7/8 Flexible Flex Head Pass Through Ratchet WA28AFL Pre Owned.

]]> https://usedhandtools.net/2024/07/snap-on-78-flexible-flex-head-pass-through-ratchet-wa28afl-pre-owned/feed/ 0