NivComp Digital Altimeter Level, its an easy-to-use alternative to Laser Levels

NivComp Digital Altimeter Level, its an easy-to-use alternative to Laser Levels
NivComp Digital Altimeter Level, its an easy-to-use alternative to Laser Levels
NivComp Digital Altimeter Level, its an easy-to-use alternative to Laser Levels
NivComp Digital Altimeter Level, its an easy-to-use alternative to Laser Levels

NivComp Digital Altimeter Level, its an easy-to-use alternative to Laser Levels
A real “easy to use” alternative to Laser Levels. Rand NEW, boxed & calibrated. We stock, give advice, service, and can CALIBRATE & REPAIR these kits. What is the NivComp system? NivComp is the first digital display. Leveling instrument of its kind to let you work alone and even around corners with better than 2 mm precision and covers up to ± 2.5 metres vertically over an area of 48 metre diameter. NivComp directly displays vertical measurements on a clear LCD, in large, easy to read digits – unlike conventional builders optical (Dumpy) and laser levels. Its a excellent system: very versatile & in some applications has big advantages over other, more conventional leveling methods. How does NivComp work? The NivComp system consists of a hose reel with retractable handles, a stable long flexible hose (tube) and display handset. Inside the hose reel is a fluid container and locking screw. The display handset contains a high-quality pressure measuring module & easy-to-read LCD. Levels are very accurately determined by the pressure changes between the fluid container in the reel and the handset. The pressure changes result from the height difference between the handset and the fluid container. The measuring principal is applicable to the entire horizontal and working range of the hose. Applications allow blind level measurements over obstructions or without visual contact, eg around corners, between trenches or adjacent rooms, etc. Also, it covers most applications to determine flatness and slope measurement. What are the Main Features? A clear liquid crystal display (LCD) on the handset. User self calibration mode very useful. Auto switch-off after 30 mins to conserve power. An included set of 4 extension rods to extend the range of the NivComp. (Enables the User to reach up high & down into trenches etc). Durable & maintenance free. No setting up or tripods required. Measures height differences in blind areas (eg from one room to another, or inside to outside). No laser beam (so no safety issues). Display Unit can be held vertical or flat. Horizontal 48 metre (24m radius). Vertical ±2.5m or ±4m with extension rods. >0.5% indicated height measurement. 9v PP3 battery (included). FULL KIT COMPRISES of. NivComp Altimeter Hose Reel, Digital Handset, fitted batteries, set of extension rods with magnetic clamp & handset cradle. All protected in a very robust carry case. User Instruction & Safety Manual. Drilling and Wall removal work. Wall break-throughs into houses. Water drainage & gutters. Installation of shuttering, concrete floors, cornerstones. Fitting Steels, Lintels, doors & windows. Pipework & electrical installation. Machine & conveyor installation. General measurement & survey reports. Please check your postcodes below. IV52 IV54 & IV63. ISLE OF MAN (IM) & ISLE OF WIGHT (IW). All IM & IW postcodes. Engineering Ltd, based in Chesterfield, England – who specialise ONLY in levelling & surveying equipment. All consignments are insured & trackable. See other details for our International customers. As from 1 JANUARY 2010. We have been established for over 32 years & pride ourselves with good customer service. Can I use the instrument on wet surfaces? Can the hose also be pulled through a window or over a wall? May the hose sag from a scaffolding? When is an altitude calibration necessary (instrument setup)? When is a technical check necessary? Can the hose reel remain in the case during measurement? Can additional hose be pulled out during measurement? How long does the battery last? Does the weather or air pressure affect the accuracy? Is there a hose substitute? I forgot operating the pressure-spindle can I still level? The case is damaged is there a replacement case? How can I clean the LC-display? How shall a slope be ascertained? (Table on the rear of the unit). Only if it does not immerse! The instrument is drip-proof but because of the measuring principle not water-proof. For protection, the accessories or, if necessary, a plastic bag can be used. If water has entered unintentionally, make sure that the instrument can dry quickly (by opening the battery lid, removing the battery, putting the handheld device up-end, drying). Please keep also the inside of the case dry. Yes deposit the hose reel in the building and transmit the level from inside to outside or the other way round. When overcoming walls or obstacles, please make sure that the altitude difference between hose reel and handheld device does not exceed + 3 metres if necessary, please deposit the hose reel on some elevation. A sag between the holders is allowable. Please also note the directions for the application of the instrument outside of buildings. Generally, you must lead the hose that way that it does not impair the passages safety and cannot drop off over a greater length. Levelling works should be carried out quickly and with check measurements in order to finally remove the instrument from the scaffolding. For most of the applications, this function is not required. Where the difference in altitude can be measured with a measuring tape or folding rule, it should be proceeded this way. The altitude calibration changes by a few per mil (1..2) according to the region or over a long time period as well. Only if altitude differences accurate to the millimetre are to be obtained, an occasional check of the altitude calibration is recommended. Two vertical line up points with exactly 1000 mm altitude difference (1m-water level, 1m-pieces of timber) are suitable for this. A coarsely adjusted altitude calibration can be reset to the factory setting per ->Sett -> r. The altitude calibration always uses millimetre! Only if deviations exceeding the allowable tolerance limits are detected at repeated check measurements or if there is another detectable defect. Important: – while measuring, the hose reel must lie solidly – the pressing screw must be correctly adjusted to the measurement point – do not measure too hastily, please note the directions of the operating instructions. Yes, but the case should lie solidly and not at an angle. If you pull out more length of the hose, the level can be shifted by approximately 1 millimetre. How long does the. About 250 300 hours in measuring mode i. At an average usage about 2 years. Alkaline batteries are preferable accumulators are not applicable. Just outdoors outdside of buildings. At longer and more intensive insolation, the instrument can reach critical temperatures! – also great changes in temperature over sections of the hose reduce reproducibility hence do not lead the hose over hot surfaces. Under unfavorable conditions carry out measurements only in compliance with the directions for exact levelling. Only if the hose is so greatly damaged that liquid is leaking out, the instrument is to be transmitted to the technical service. The liquid is neutral and not toxic. Scratch marks or adhesive residues on the hose do not affect the measuring system. The hose is double-walled, solid, it does not break, it can be stepped on or rolled over. If the pressure-spindle is not in the mode measure during levelling, deviations of some millimetres are possible. If the instrument was being kept for several days or weeks without having turned the pressure-spindle into the mode store, bubbles can occur in case of subsequent severely hose movements. Therefore, the instrument should be correctly stored 1-3 days before the next usage. In case of wrong storage, the flashing module of the hose reel reminds of the incorrect (spindle-)position through the sound of a siren at an interval of one to two days (see manual section special indications). Mostly, mechanical parts are available as spare parts. The fittings on the case can also be replaced by the user (snap-in/ joints, shutters and grip). These can be ordered at specialized dealers. The same applies to accessory parts. Preferably if the paint or mortar has not dried yet. In order to avoid scratch marks, use some water and a wet brush. Do not use any solvents or benzine for cleaning! The slope [%] of a surface is determined by the measurement of the height-difference at two points and corresponds to the height-difference divided through the horizontal distance of the measure points multiplies with 100. A height-difference of 35 mm in the distance of 1000 mm corresponds to an inclination of 3,5%. The corresponding angle-measurement in degree can be determined with the table on the rear of the unit: 35 mm/ms correspond to 2 degrees. With small angle < 10° inter-dimensions can be determined by addition of the values. The item "NivComp Digital Altimeter Level, its an easy-to-use alternative to Laser Levels" is in sale since Friday, September 17, 2010. This item is in the category "Business, Office & Industrial\Hand Tools\Measuring Tools\Laser Measurers". The seller is "laserlevelsonline" and is located in Chesterfield. This item can be shipped worldwide.
  • Type: Levels & Lines
  • MPN: NI0001-H25-HS
  • Sub-Type: Digital Altimeter
  • Display: Digital
  • Brand: NivComp

NivComp Digital Altimeter Level, its an easy-to-use alternative to Laser Levels